GalForce Steel Hollow Sections

GalForce™ products are light galvanized steel hollow sections that offer you the advantage of better protection against the elements over traditional primer painted products. You will find a variety of shapes and sizes in the GalForce™ range and there is sure to be one to suit your next project. Available in square, rectangular, circular and rail hollow sections GalForce™ products are manufactured using a fully hot-dip galvanized steel strip. This means that GalForce™ products are galvanized on the inside as well as the outside. The entire GalForce™ range is manufactured in a leading edge facility owned by Steelforce Australia Ltd – a 100 percent Australian owned company. GalForce™ products are galvanized on the inside and outside to stringent Australian Standards and comply with AS/NZS 4972 (Section 3) so you’re protected no matter which way you look at it. GalForce™ is suitable for use in a wide variety of applications, limited only by your imagination. Ask for GalForce™ by name at your nearest outlet.

Features & Benefits

Galvanized on both sides – inside and outside

Use standard techniques to clean, weld and paint GalForce™

Suitable with top coats and can be powder coated without difficulty

Appropriate for use in mild environments in an number of applications

GalForce™ can be readily drilled, cut and bent

GalForce™ complies with Section 3 of AS/NZS 4792 – Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process

GalForce™ is manufactured to AS/NZS 1163 C350 LO*